& 1. Purpose: Steel strand threading machine (prestressed steel strand penetration hole is referred to as threading), which is mechanically driven. The rollers clamp the steel strand for transmission. It can advance, retreat, and continuously transmit. It can also It can be inchingly transmitted to convey the speed of the steel strand with stepless speed regulation. It is easy to operate, has reliable performance and significant efficiency. This machine greatly reduces labor intensity. The stringing machines produced by our company are widely used in large bridges, box girders and structures. . It is an ideal cable-threading construction machine and is the main tool for threading steel hinges in tunnels when building bridges and large buildings using prestressed work.
2. Technical Parameters
The diameter of the steel hinge wire is generally ￠￠ (can be configured according to user needs)
Conveying distance
Motor power and input speed:. Optional as needed
Size of the whole machine: length, width and height&
Weight of the whole machine
3. Working principle
The reducer drives the double driving wheels to rotate, the steel hinge wire is inserted from the wire inlet at one end, the driving wheels and the double The cluster wheel presses the steel hinge wire and moves forward along the conduit to penetrate the reserved hole until it passes out from the other end of the hole and reaches the tensioning size.
IV. Main Features
This steel strand stringing machine can advance and retreat, fast or slow, is small in size, light in weight, simple to operate and easy to maintain. During the construction process, two people can complete it. operation, greatly reducing labor intensity and improving production efficiency.
5. How to use
Preparation before starting up
Check whether the electrical circuit is intact and check the oil level inside the reducer.
Check whether the motor rotation direction is in line with the direction marked by the arrow on the casing.
Turn on the power and debug to confirm the forward and reverse rotation.
, normal operation
Insert the framed steel hinge wire from the cable inlet of the machine, click the wire inlet button switch to slowly penetrate the steel hinge wire into the machine, and enter the reserved hole along the conduit to The other end is pierced to reach the reserved tensioning size and cut off with a hand-held sander.
When the conveying distance cannot be reached, the compression spring screw of the cluster driven wheel on the machine can be adjusted until the working requirements are met, but the adjustment should not be too tight to avoid aggravating the wear of the pressing wheel during operation and reducing the service life.
When working, pay attention to whether the operation is normal. When any fault is found, stop it immediately, find out the cause and eliminate the fault before starting it again.
6. Maintenance: &
Regularly check the wear degree of the lubricating oil and the pressure wheel in the steel strand stringing machine. If the pressure wheel cannot be adjusted to the level of use, it should be replaced in time.
After each use, the steel strand stringing machine should be placed in a dry and rain-free environment.
Steel strand guide cap is also called prestressed steel strand threading cap. When the steel strand threading machine is threading, the protective sleeve installed on the front end of the steel strand mainly protects the corrugated pipe and prevents Damage to corrugated pipes when steel strands are bundled.
Due to different product production batches, specific models, and shooting angles, the pictures are for reference only. For details, please contact our sales staff for specific verification.
Telephone: (WeChat)
Landline
Penguin
5.5KW Bridge Steel Strand Threading Machine 11KW Prefabricated Box Girder Steel Strand Threading Machine